RESUMO Em decorrência dos problemas ambientais gerados pelas disposições inadequadas de resíduos, o presente trabalho busca encontrar uma alternativa para a reciclagem dos resíduos de construção civil (RCC). Entre as aplicações possíveis, o agregado miúdo reciclado do RCC pode ser utilizado como um componente alternativo em substituição total ou parcial à areia artificial nas misturas cimentícias destinadas à produção de blocos de concreto (B). Assim, este trabalho objetiva analisar a viabilidade técnica sob o aspecto físico e mecânico do uso de agregados miúdos reciclados para a confecção de blocos para sistemas de vedação vertical. Utilizou-se o traço de referência 1:19,19 (cimento:agregados, em massa), no qual o agregado miúdo areia artificial foi progressivamente substituído por areia reciclada de RCC. Foram testadas as substituições nos teores de 25, 50 e 100% de substituição de resíduo. As características físicas e mecânicas dos traços de concreto de referência e com substituição foram avaliadas segundo a norma NBR 12118:2013. Por meio do estudo de dosagem, buscou-se identificar o traço que incorporasse a maior quantidade de resíduos na mistura, mantendo o desempenho dentro dos limites estabelecidos pelas normas. O traço com 50% de incorporação foi aquele que apresentou o melhor desempenho, com teor de absorção de água de 14,30% e resistência média a compressão de 4,13MPa. Os Blocos de concreto da família 15x40 (dimensões de 140x190x390mm) produzidos com este teor de incorporação por meio de uso de máquina do tipo vibroprensa, apresentaram resistência à compressão característica de 3,21MPa e teor de absorção de água de 9,89%, sendo classificados como Classe C, sem função estrutural. Desta forma, os agregados miúdos de origem de RCC são viáveis tecnicamente para serem incorporados em matrizes cimentícias para a produção de blocos de concreto, corroborando com a sustentabilidade urbana.
ABSTRACT Due to the environmental problems generated by inadequate waste disposal, this work seeks to find an alternative for recycling construction waste (RCW). Among the possible applications, the recycled fine aggregate of RCW can be used as an alternative component in total or partial replacement to artificial sand in the cement mixtures designed for the production of the concrete blocks. Thus, this work aims to analyze the technical feasibility of the physical and mechanical aspects of the use of recycled fine aggregates for the production of concrete blocks for vertical panel systems. The reference trace 1:19.19 (cement: aggregates, by mass) was used in the dosage study, in which the industrial fine aggregate sand was progressively replaced by recycled construction waste sand. Substitutions were tested at 25, 50, and 100% of residue replacement. The physical and mechanical characteristics of reference and replacement concrete traces were evaluated according to Brazilian NBR 12118:2013 regulation. By the dosage study, it was sought to identify the dosage that incorporated the largest amount of residues in the mixture, maintaining the performance within the limits established by the regulation. The dosage with 50% incorporation displayed the best performance, with a water absorption content of 14.30% and average compressive strength of 4.13MPa. The 15x40 family concrete blocks, with dimensions of 140x190x390mm, produced with this dosage by the use of a Vibro press machine, displayed compressive strength characteristic of 3.21MPa and 9.89% of water absorption content, being classified as Class C, without structural function. Therefore, the construction waste aggregates are technically feasible to be incorporated into cementitious matrices for concrete block production, corroborating with urban sustainability.